Description

Dimensions:

Front: 12cm
Instructions for Use:

Lint roll your garment to ensure that any debris is removed.
Pre-heat your press/mini/iron (heat will depend on the garment – for cotton, we use approximately 150°C).
Press your design for 30-40 seconds.
Wait until the film & garment are cooled to room temperature.
Once they have cooled, remove the transfer sheet.
Apply a Teflon sheet to the top of your design.
Re-press for 5 seconds.
Note: All DTF Transfers are warm-peel, meaning the film & garment need to be giving a few secs before you remove the transfer sheet. They will not adhere if you attempt to remove them hot-off-the-press.